Impacts of converting from leaded to unleaded gasoline on ambient lead concentrations in Jakarta metropolitan area

Total suspended particulate mater （TSP） concentrations were monitored for one year from July 2000 and for one year from April 2003 in Jakarta City. Thirteen elemental TSP components, aluminum （Al）, sodium （Na）, iron （Fe）, lead （Pb）, potassium （K）, zinc （Zn）, titanium （Ti）, manganese （Mn）, bromine （Br）, copper （Cu）, chromium （Cr）, nickel （Ni）, and vanadium （V） were analyzed by a sequential X-ray fluorescence spectrometer. Al, Na, Fe, K, and Pb were major components at most of the sampling locations in 2000. However, only Pb in 2003 dramatically decreased to one tenth. The phase-out of leaded gasoline began on July 1, 2001 in Jakarta City and lead content in gasoline decreased to one tenth, too. The decrease in Pb concentration was a result of the phase-out of leaded gasoline, as lead emissions mainly are exhaust gas from vehicles.     

Genetic engineering of cyanobacteria to enhance biohydrogen production from sunlight and water

To mitigate global warming caused by burning fossil fuels, a renewable energy source available in large quantity is urgently required. We are proposing large-scale photobiological H(2) production by mariculture-raised cyanobacteria where the microbes capture part of the huge amount of solar energy received on earth's surface and use water as the source of electrons to reduce protons. The H(2) production system is based on photosynthetic and nitrogenase activities of cyanobacteria, using uptake hydrogenase mutants that can accumulate H(2) for extended periods even in the presence of evolved O(2). This review summarizes our efforts to improve the rate of photobiological H(2) production through genetic engineering. The challenges yet to be overcome to further increase the conversion efficiency of solar energy to H(2) also are discussed.     

Dietary patterns and blood levels of PCDDs, PCDFs, and dioxin-like PCBs in 1656 Japanese individuals

The association between dietary patterns and blood dioxin levels has not been fully investigated. The present study population consisted of 755 men and 901 women (aged 15-73 years) living in 90 different areas of 30 prefectures of Japan. Dietary habits were assessed by inquiring about the consumption frequency of 28 foods, food groups and beverages. In addition, the blood levels of 29 polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzo-furans (PCDFs), and dioxin-like polychlorinated biphenyl (DL-PCBs) congeners were determined by high-resolution gas chromatography/mass spectrometry. The median total toxicity equivalent (TEQ) in the blood, which was calculated on the basis of the toxicity equivalency factors of WHO (2005), was 16 pg TEQ g⁻¹ lipid. Principal component analysis identified five dietary patterns: Healthy diet (high intake of vegetables and fruits); Meat/High fat intake (high intake of meat, meat products, and eggs); Seafood and Alcohol (high intake of fish, shellfish, and alcoholic beverages); Miscellaneous; and Milk products and Alcohol intake (high intake of milk, Milk products, and alcoholic beverages). After adjusting for sex, age, body mass index, and smoking habits, the Seafood and Alcohol pattern scores were significantly related to higher blood levels of total TEQ and PCDDs/PCDFs/DL-PCBs, and the Milk products and Alcohol pattern scores were correlated with higher blood levels of DL-PCBs. More detailed analysis showed that the intake frequencies for alcoholic beverages and seafood were independently and positively associated with total TEQ and the TEQ of PCDFs and DL-PCBs. The association between alcoholic beverage intake and PCDDs was also significant. Analysis of dietary patterns may be useful for identifying the dietary characteristics of individuals with a high dioxin body burden.     

Moderation of dust explosions

Inherent safety is a proactive approach to process safety in which hazards are removed or minimized so as to reduce risk without engineered (add-on) or procedural intervention. Four basic principles are available to attain an inherently safer design—minimization, substitution, moderation, and simplification. The subject of the current paper is the principle of moderation as it applies to the prevention and mitigation of dust explosions.

Moderation can be achieved by processing a material under less severe operating conditions or by processing the material in a less hazardous form. With respect to the latter approach, it may be possible to alter the composition of a dust by admixture of solid inertants, or to increase the dust particle size so as to decrease its reactivity. Additionally, avoidance of the formation of hybrid mixtures of explosible dusts and flammable gases is an application of moderation of the material hazard.

Several examples are given for each of the above three forms of moderation. The discussion on admixture of solid inertants includes examples from the following industrial applications: (i) refractory materials manufacturing, (ii) food processing, (iii) power generation, (iv) industrial recycling, and (v) foundry shell mold fabrication. The importance of particle size consideration is explained first from the perspective of engineering tools such as the Dow Fire & Explosion Index, and professional guidance on the definition of a dust and suitable particle sizes for explosibility testing. Industrial examples are then drawn from the following areas: (i) rubber recycling and textile manufacturing, (ii) industrial recycling, (iii) wood processing, (iv) dry additive handling (polyethylene facility), (v) polyethylene production, (vi) carbon block recycling, and (vii) coal mining. The concluding discussion on hybrid mixtures includes brief cases from the process safety literature.     

Dispersal and persistence of genetically modified oilseed rape around Japanese harbors

Background, aim, and scope

The possibility of gene transfer from genetically modified oilseed rape (OSR) to its cultivated or wild relatives is of concern since its commercial cultivation, because of its potential weediness and impact on the environment. Introgression of modified genes can affect conservation of agricultural crops, because there are many cultivars and wild Brassicaceae that may cross with genetically modified OSR (Brassica napus) in Japan. Japan imports more than 2 million tons of OSR a year from Canada and other countries. Since volunteers of GM OSR were found around harbors in 2004, a lot of feral GM OSR was discovered in Japan. To consider the way how to keep domestic Brassicaceae from GM contamination, we surveyed and analyzed the dispersal and persistence of GM OSR around Japanese harbors. We present the cause and abundance of GM OSR in Japan by this paper.

Materials and methods

Survey of the feral OSR was performed several times a year at different seasons when domestic OSR either grows or does not around port areas. Detection of herbicide tolerance in feral B. napus was done by test papers that cross react with the modified gene product. Two kinds of herbicide tolerance (glyphosate and glufosinate) were tested.

Results

The feral B. napus were discovered around all 13 harbors that import rapeseeds from foreign countries. Genetically modified, herbicide-tolerant OSR were frequently found in the surveyed populations. Two kinds of herbicide-tolerant OSR (glyphosate- and glufosinate-tolerant) were discovered in a natural condition 40 km from port to an oil factory where 60,000 tons of OSR seed are processed a year. The cause of voluntary growth of OSR is seed spillage during transportation by trucks from harbors to oil factories and other processing facilities. Some of the feral OSR growing along the roadsides of transport paths exhibited perennial growth spilling their seeds around the places. Alteration of the generation of feral GM OSR was discovered for the first time in Japan as a result of this study. We studied the yearly change of feral OSR abundances focusing on Yokkaichi port over the 4 years since 2004. The rate of GM OSR increases year to year, and reaches nearly 90% in 2008.

Discussion

The possibility and consequences of gene transfer from the genetically modified OSR to domestic species (B. rapa and B. juncea) were discussed in relation to impact on domestic agriculture and on environments. Evolutional meaning of the gene transfer was also discussed with respect to the gene construct of GM OSR. This study shows the importance of another pathway of modified gene transfer to non-GM relative species by seed transportation in addition to pollen transfer from commercial cultivation of genetically modified OSR.

Conclusions and recommendations

We identified unintended dispersal and persistence of GM OSR around Japanese harbors that import OSR from Canada and other countries. Both glyphosate- and glufosinate-tolerant feral B. napus were discovered. The cause of volunteer OSR is spillage of the seeds during transportation by truck to oil factory. The feral GM OSR sometimes showed perennial growth in Japanese phonological conditions which are not observed for domestic Brassicaceae. In addition, we confirmed an alteration of generations by feral GM OSR in Japan. The possibility of cross pollination and GM gene introgression to domestic varieties can occur in these environments. To improve the situation, each responsible organization, company, administration, or government should establish measures how to stop the dispersal and persistence of GM OSR in nature. Also, the GM plant developers are responsible for revising this situation.     

Effects of dietary habits and CYP1A1 polymorphisms on blood dioxin concentrations in Japanese men

The major source of dioxin impurities in Japan in the past was agrochemical formulations; more recently, it has been exhaust from waste incinerators. To examine the environmental and genetic factors that influence blood dioxin concentration, we investigated the relationship among dioxin concentrations, dietary habits and cytochorome P450 1A1 (CYP1A1) polymorphisms (MspI type and Ile-Val type) in Japanese fishermen and farmers, including also a group of office workers as controls. The mean dioxin concentrations in the fishermen, the farmers and the controls were 161369, 79079 and 100500 pg/g fat, respectively. The elevated dioxin concentration with polychlorinated dibenzo-p-dioxins, polychlorinated dibenzofurans and coplanar-PCBs found in the fishermen may be due to the frequent consumption of fish; no such relationship was found both in the farmers and the controls. We found that the concentrations of congeners found as impurities in certain chemicals such as those previously used in agriculture showed no significant differences among the three groups; we consider it unlikely that the farmers would be directly exposed to dioxins from such chemicals. Thus, it is probable that the primary route of dioxin exposure in the Japanese population is through the food chain via fish consumption, regardless of occupation. No meaningful relationship between blood dioxin concentration and CYP1A1 polymorphisms was found in this study, although there was a significant difference between the concentration of total non-ortho-PCBs in genotypes A and B. Further studies on more subjects, including those of genotype C, are needed to confirm the relationship between blood dioxin concentrations and MspI polymorphisms.     

Effect of organic suspended solids and their sedimentation on the surrounding sea area

A study of sediment contamination was made in one of the 23 specific designated important ports in Japan, the inner part of which had been used as wood pool. The study focused on the relationship between contaminants and organic matter in terms of ignition loss and the impact of the wood pool on the port area. Organic matter exists in the form of suspended solids and deposits. Sediment samples were taken from the mouths of the rivers feeding into Shimizu Port, from the wood pool and from Shimizu Port. Samples within Shimizu Port showed that as the ignition loss decreased with distance from the wood pool, other properties including the concentrations of trace metals, ignition loss and sulfide content also decreased with the distance. In conclusion, Shimizu Port seems to function as a buffer area between the wood pool and Suruga Bay.     

一组高效稳定纤维素分解菌复合系MC1的筛选及功能

从4种堆肥样品中分别筛选出纤维素分解能力较强的4组混合菌,再以酸碱反应互补的原则重新优化组合并驯化成1组纤维素分解能力非常强而稳定的纤维素分解菌复合系MC1.100mL培养物在50℃静止培养72h,分别可分解0.48g滤纸、0.49g脱脂棉、0.19g麦秆和0.08g锯末.分解滤纸时,第24h CMC糖化力最高,为122.3U·mL^-在初始pH4～10的不同培养基上接种,均能把pH调到中性,最后稳定在8.0～8.5之间.在连续投放滤纸情况下纤维素分解能力稳定保持20d以上,其发酵液的pH在有滤纸时稳定在6.0～6.5之间,没有滤纸时稳定在8.0～8.5之间.     

Explosion properties of highly concentrated ozone gas

The explosive self-decomposition characteristics of gaseous ozone with a concentration of up to almost 100 vol% were quantitatively investigated using a closed system with an electric spark device. The lower self-decomposition (explosion) limit for ozone diluted with oxygen at room temperature and atmospheric pressure was 10–11 vol%, and so ozone at more than 10–11 vol% will lead to an explosive chain decomposition reaction leading to its complete conversion to oxygen in a vessel. The lower explosion limit shifts to a higher concentration with a decrease in pressure. The limit was about 80 vol% under a reduced pressure of 10 Torr. We also confirmed that explosion trigger energy (minimum ignition energy) is strongly dependent on ozone concentration and pressure. For example, the minimum trigger energy for 15 vol% ozone at a pressure of 76 Torr (about 220 mJ) was more than 20-fold that at atmospheric pressure (about 10 mJ), and that for 13 vol% ozone (about 580 mJ) was approximately 30 times higher than that for 20 vol% (about 20 mJ) at the same pressure of 76 Torr. Moreover, the physical characteristics of the trigger energy sources (e.g. spark gap and electrode tip angle) leading to the decomposition (explosion) of ozone were investigated under various conditions.     

Identification of sources of lead in the atmosphere by chemical speciation using X-ray absorption near-edge structure (XANES) spectroscopy

Sources of Pb pollution in the local atmosphere together with Pb species, major ions, and heavy metal concentrations in a size-fractionated aerosol sample from Higashi-Hiroshima(Japan) have been determined by X-ray absorption near-edge structure(XANES) spectroscopy, ion chromatography, and ICP-MS/AES, respectively. About 80% of total Pb was concentrated in fine aerosol particles. Lead species in the coarse aerosol particles were PbC2O4, 2PbCO3·Pb(OH)2, and Pb(NO3)2, whereas Pb species in the fine aerosol particles were PbC2O4, PbSO4, and Pb(NO3)2. Chemical speciation and abundance data suggested that the source of Pb in the fine aerosol particles was different from that of the coarse ones. The dominant sources of Pb in the fine aerosol particles were judged to be fly ash from a municipal solid waste incinerator and heavy oil combustion. For the coarse aerosol particles, road dust was considered to be the main Pb source. In addition to Pb species, elemental concentrations in the aerosols were also determined. The results suggested that Pb species in size-fractionated aerosols can be used to identify the origin of aerosol particles in the atmosphere as an alternative to Pb isotope ratio measurement.